Decomposing composite solids
About this app
Take composite solids apart in 3D: house, silo, tower, glass pyramid and a drilled workpiece. As the parts separate, the contact faces light up and are subtracted twice from the surface area; missing lengths come from the Pythagoras triangle inside the solid.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
The idea
A composite solid is split into basic solids such as cuboids, prisms, cylinders, cones, hemispheres or pyramids. Its volume is the sum of the part volumes. For the surface area, the contact face A lies inside the finished solid; it belongs to both part surfaces and is therefore subtracted twice: S = S₁ + S₂ − 2 · A. For a hollow solid the drilled-out volume is subtracted; on the surface the bore circles drop out and the inner wall is added. Missing lengths such as a roof slant, slant height or the height of a face come from the Pythagorean theorem in a right triangle inside the solid.
What the app shows
Five solids made of real materials are available: a house (cuboid with a roof prism), a silo (cylinder with hemisphere), a tower (cylinder with cone), a pyramid (base with glass pyramid) and an aluminium workpiece with a through bore. The “Take apart” slider, or pulling the upper part up, separates the pieces, and the contact faces light up. The “Working” panel builds up volume and surface area with numbers and compares the sum of the parts with the solid in an area balance. In the “Sizes” panel you set every length; dimension arrows and a Pythagoras triangle can be switched on.
Try it yourself
With the default sizes, lift the roof off the house: a 10 × 6 × 4 m cuboid and a prism with a 4 m roof height give V = 240 + 120 = 360 m³. For the surface, 248 + 184 m² are counted and the 60 m² contact face comes off twice, so S = 312 m². Switch on the Pythagoras triangle and read the roof slant s = √(3² + 4²) = 5 m. With the workpiece you see why the surface grows despite the bore: two bore circles drop out and the inner wall is added. Then change the sizes and watch every line of the working adjust.
Frequently asked questions
- How do you find the surface area of a composite solid?
- Add the surface areas of the parts and subtract each contact face twice, because it belongs to both parts and lies inside the finished solid: S = S₁ + S₂ − 2 · A. Adding only the faces visible from outside gives the same result.
- How do you find the volume and surface area of a hollow solid?
- Subtract the drilled-out volume from the volume of the outer solid. On the surface the bore circles at the top and bottom drop out, and the inner wall 2πr · h is added. For the 10 × 6 × 4 cm workpiece with a bore of r = 1.5 cm, V = 240 − 9π ≈ 211.73 cm³.
- How do you find a slant height with Pythagoras?
- Look for a right triangle inside the solid made of the height, half the base edge or the radius, and the length you need. For a cone s² = h² + r², for a square pyramid h_s² = h² + (a/2)². The slant height lies on the face and is longer than the vertical height.
- What can I do in the app?
- You pick one of five solids, rotate it in 3D, pull it apart into its parts and change every size. The working shows volume and surface area line by line, including contact faces, bore circles and inner wall; a Pythagoras triangle inside the solid supplies the missing length.
Subject: School mathematics (Gymnasium)
More from School mathematics (Gymnasium)
- Tree diagram & path rules
- Binomial identities through geometry
- The number π
- Unit circle & sine curve
- Exponential growth & decay
- Ulm’s glass pyramid
- Equation balance
- Half-life & decay
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps