Skip to content
All apps

Real gases — CO₂ isotherms and the critical point (3D)

About this app

p–Vm–T state surface of CO₂ after van der Waals with coexistence region, critical point and ideal-gas comparison, next to a piston and cylinder in the particle picture. Isothermal compression shows condensation at constant vapour pressure below Tc and the supercritical fluid above it. The compression factor Z = pVm/(RT) quantifies the deviation from the ideal gas.

The physical chemistry

Real gases deviate from ideal behaviour because their particles take up space and attract each other. The van der Waals equation (p + a/V_m²)(V_m − b) = RT accounts for both. Below the critical temperature a gas condenses when compressed at constant temperature: while liquid and gas coexist, the pressure stays at the vapour pressure. Above the critical point (for CO₂ measured at about 31 °C and 73.8 bar) there is no phase boundary, only a supercritical fluid. The compression factor Z = pV_m/(RT) quantifies the deviation from an ideal gas.

What you see

A 3D view shows the p–V_m–T state surface of CO₂ from the van der Waals equation, with the coexistence region and the critical point, optionally alongside the ideal-gas surface. Next to it a piston cylinder shows the particles, and a meniscus forms during condensation. A p–V chart plots the chosen isotherm with the coexistence region and the dashed van der Waals loop, which Maxwell’s equal-area rule replaces with the plateau. A Z chart plots the compression factor against pressure. Measured and modelled critical data appear side by side.

Things to try

Pick an isotherm below Tc and press compress: the pressure rises, then holds on the plateau while the vapour fraction drops, and only shoots up once everything is liquid. Repeat above Tc: no plateau, no meniscus. In the Z chart, check where attraction dominates (Z < 1) and where particle volume dominates (Z > 1). Camera buttons jump between overview, surface, p–V side and cylinder.

Frequently asked questions

What is the critical point of a gas?
The critical point is the state at which liquid and gas can no longer be told apart. Above the critical temperature Tc no amount of pressure will liquefy the gas. For CO₂ it lies at about 31 °C and 73.8 bar.
Why does pressure stay constant during condensation?
While liquid and gas coexist, further compression only moves particles from the gas into the liquid. The pressure stays at the vapour pressure for that temperature. Only when everything is liquid does it rise steeply, because liquids are barely compressible.
What does the compression factor Z tell you?
Z = pV_m/(RT) compares the real molar volume with that of an ideal gas at the same pressure and temperature. Z = 1 means ideal behaviour, Z < 1 means attraction dominates and Z > 1 means the particles’ own volume dominates. At low pressure Z tends to 1.
What can I adjust in the app?
You choose the temperature or a preset isotherm, change the molar volume in the piston or let it compress automatically. Layers such as the ideal gas, the van der Waals loop, the state surface and labels can be toggled, and the V_m axis can be linear or logarithmic.

Subject: Chemistry

More from Chemistry

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps