Die Wundermaschine (3D)
About this app
Ein riesiger Musikautomat: Eine Stiftwalze spielt zehn Instrumente von Pauke, Orgelpfeifen und Flügel bis Synthesizer und Theremin. Vier Antriebe (Elektromotor, Druckluft, Federwerk, Fallgewicht) mit sichtbarem Kraftweg, Leistungs- und Windbilanz, Statik der Orgelempore als Bogenbrücke mit Podesten, Zug, Druck und Durchbiegung, Kugelbahn und sechs Wunder, „Folge dem Ton“ bis zur Kraftquelle.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
How a music automaton works
A music automaton plays without musicians. Its score is a pinned barrel: each pin stands for a note at a given moment, each track for a pitch. As the barrel turns, the pins lift keys, which pass the command to an instrument by pull wire, air hose or cable. The tempo depends only on the barrel speed, the pitch only on the instrument: an organ pipe sounds through its length, a string through length, tension and mass. The power for barrel, bellows and hammers comes from a drive that must deliver enough of it.
What the app shows
A machine with an organ gallery on an arch bridge and stepped platforms, with ten instruments: timpani, stopped and open organ pipes, harp, a bowed-wheel string instrument, glockenspiel, pneumatic percussion, a grand piano with a player unit, a bass machine, synthesizer and theremin. Four drives are available: electric motor, air motor, spring drive and falling weight. Clutches visibly switch the power path while the music stays the same. An energy panel computes power, running time and air demand, and the statics view shows tension and compression in the members and the deflection.
Things to try
Tap an instrument and a glowing trail runs back from it to the power source. Switch from the electric motor to the spring drive and see which shafts turn now. Raise the tempo until the torque runs out: first the electrics are shed, then the machine stops. Turn on statics, slide the test load across the gallery and watch which members work in tension and which in compression.
Frequently asked questions
- What is a pinned barrel?
- A pinned barrel is the program of a mechanical musical instrument. Pins on its surface set pitch and timing. Music boxes, barrel organs and orchestrions work this way.
- Why is a stopped organ pipe shorter than an open one?
- A stopped pipe, closed at the top, holds a quarter of the wavelength, an open pipe half of it. For the same note the stopped pipe is therefore about half as long.
- What does 1.35 G + 1.5 Q mean in structural design?
- It is the usual load combination for the ultimate limit state: dead load G is multiplied by 1.35, variable load Q by 1.5. This keeps the structure safe even with unfavourable deviations.
- What can I try in the Wonder Machine?
- You choose piece, drive and tempo, switch instruments on and off, follow a note back to the drive, read power and air balance and test arch and platforms with a movable load. Efficiencies and powers are model values.
Subject: Crazy Machines
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps