Bending stress & moment of inertia
About this app
Bending beam under moment M: linear bending stress σ=M·y/I across the section (tension/compression zones), neutral axis; switchable section (rectangle, I-beam) with live moment of inertia I.
The basics
A bending moment M curves a beam. The fibres on one side are stretched and those on the other side compressed. Between them lies the neutral axis, which passes through the centroid and carries no stress. In pure bending the stress grows linearly with the distance y from the neutral axis: σ(y) = M·y/I. The second moment of area I measures how far the material lies from that axis; for a rectangle I = b·h³/12. The largest stress occurs at the outer fibre: σ_max = M/W with the section modulus W = I/y_max.
What the app shows
The app shows a beam cross-section under a bending moment M, next to the linear stress distribution σ(y). The tension zone is red, the compression zone blue, and the neutral axis is marked. You choose between a rectangle and an I-section and set the dimensions: width and height, and for the I-section also flange width, flange thickness and web thickness. The second moment of area I, the outer fibre distance y_max, the section modulus W and the maximum stress σ_max are computed live.
Things to try
Double the height h of a rectangle and watch I rise eightfold while the outer fibre stress drops. Double the width instead: I only doubles. Then switch to the I-section: because most of the material sits far out in the flanges, it reaches a much larger I than a rectangle of comparable area.
Frequently asked questions
- How do you calculate bending stress?
- For straight bending σ(y) = M·y/I, where y is the distance from the neutral axis and I is the second moment of area. The maximum stress occurs at the outer fibre: σ_max = M/W with W = I/y_max. For a rectangle W = b·h²/6.
- What is the second moment of area?
- The second moment of area I = ∫y² dA is a cross-section property that describes how the material is distributed about the bending axis. The further the material lies from the axis, the larger I and the stiffer the beam in bending. For a rectangle I = b·h³/12.
- Why are I-beams so stiff in bending?
- In an I-section most of the material sits in the flanges, far from the neutral axis. Since distance enters the second moment of area squared, an I-section reaches a much larger I than a solid section using the same amount of material. The web connects the flanges and carries the shear force.
- Which cross-sections can I compare in the bending app?
- The app offers a rectangle and an I-section with adjustable dimensions, plus a slider for the bending moment M. It shows the stress distribution over the height, I, y_max, W and the maximum stress σ_max.
Subject: Engineering mechanics
More from Engineering mechanics
- Düsenjet bis v_max (3D)
- Energy & oscillation
- Truss analysis (method of joints)
- Equilibrium & support reactions
- Kinematics
- Kinetics & Newton's second law
- Forces & vector addition
- Force decomposition
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps