Truss analysis (method of joints)
About this app
Planar truss with an adjustable load: method of joints with force balance per joint, tension members red / compression members blue, zero-force members marked, member forces computed.
The basics
An ideal truss consists of straight members joined by pins. If loads are applied only at the joints, the members carry axial forces only, either tension or compression. The method of joints isolates each joint and applies force equilibrium, ΣFₓ = 0 and ΣF_y = 0. With j joints this gives 2j equations for the member forces and support reactions. A plane truss is statically determinate when m + r = 2j (m members, r support reactions). Members that carry no force under a given load are called zero-force members.
What the app shows
The truss has six joints and nine members and rests on a pin support A and a roller D; with three support reactions it is statically determinate. A vertical load acts at a selectable joint. The app solves the system of equations and colours the members: tension in red, compression in blue, zero-force members dashed. Line thickness shows the size of each member force. A table lists all member forces and their type, together with the support reactions.
Things to try
Select joints B, C, F and G in turn as the loaded joint and drag the load arrow to change the magnitude. Watch which members become zero-force members for each load position and which switch from tension to compression. Check one joint by hand: the member forces meeting there must balance the applied load.
Frequently asked questions
- How does the method of joints work?
- Each joint of the truss is cut free, and all member forces and loads acting on it are drawn. For every joint ΣFₓ = 0 and ΣF_y = 0 apply. You start at a joint with at most two unknowns and move from joint to joint until all member forces are known.
- How do you identify zero-force members in a truss?
- Two rules help. If only two non-collinear members meet at an unloaded joint, both are zero-force members. If three members meet at an unloaded joint and two of them are collinear, the third is a zero-force member. Such members are still needed, for example for stability or for other load cases.
- How do you tell tension members from compression members?
- If all member forces are first assumed to be in tension, pointing away from the joint, a positive result means tension and a negative result means compression. Tension members are stretched; compression members are shortened and must also be checked for buckling.
- What can I change in the truss app?
- You choose the joint where the vertical load acts and set its magnitude with a slider or by dragging the load arrow. The truss geometry is fixed. The app shows all member forces in colour and in a table, along with the support reactions.
Subject: Engineering mechanics
More from Engineering mechanics
- Bending stress & moment of inertia
- Düsenjet bis v_max (3D)
- Energy & oscillation
- Equilibrium & support reactions
- Kinematics
- Kinetics & Newton's second law
- Forces & vector addition
- Force decomposition
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps