Skip to content
All apps

Same yarn, different weaves

About this app

A model for comparing weaves of the same yarn: plain weave, twill 2/2, warp satin 8 and hopsack side by side in 3D, at the same sett or at their Ashenhurst sett (a theory for rigid threads). Stations for backlight, lustre, air flow, needle pull and tearing; every number with the kind of statement it is (geometry, theory, model assumption, model value), tearing only as a ranking.

With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.

Same yarn, only the weave changes

If you weave different weaves from the same yarn, it changes how densely the threads can be set and what follows from that. After Ashenhurst’s theory (1884) for rigid, round threads, every change of side of a thread needs the room of one crossing thread: plain weave, with the most changes, gets the smallest theoretical sett, satin the largest. Real fabrics can be set denser because the yarn flattens; the ratios between the weaves agree well with Brierley’s empirical rule. So the weave, together with the yarn, decides how densely a fabric can be woven.

What the model shows

The app shows plain weave, twill 2/2, warp satin 8 and hopsack, each at the same sett or at its Ashenhurst sett. Five stations show the open share against the light (from the geometry), the lustre figure in raking light, the air permeability as a model value, the needle pull by interlacings per area and, for tearing, only a ranking without a number. Every number states what kind of statement it is: geometry, theory, model assumption or model value. Where rigid, evenly spaced threads cannot be drawn this densely in 3D without intersecting (after Ashenhurst they only fit when closed up), a top view to scale stands in front and a structure model that is not to scale behind it.

Try it yourself

Set all samples to the same sett: in the model they are then equally open against the light, although measured fabrics of this kind differ by weave. Switch to the Ashenhurst sett: in the model with round threads the plain weave stays about a quarter open, the satin only a few percent, and the satin still has fewer interlacings per area. At the air flow a prediction shows that a pore twice as wide lets 4 to 16 times as much air through in the model, depending on the range (model value).

Frequently asked questions

What is the Ashenhurst sett?
A theory by Ashenhurst (1884) for rigid, round threads: if a thread changes sides I times over R crossed threads, R / (d · (R + I)) of the crossed threads fit per unit length, which gives 0.5/d for plain weave, 0.67/d for a 2/2 twill and 0.8/d for an 8-end satin. It is not an upper limit for real fabrics; they can be set denser because the yarn flattens.
Does a weave with more interlacings cover better at the same sett?
Not in the simple model with rigid, evenly spaced threads: there the open share only depends on thread density and thread width. Measured, fabrics of the same yarn and sett differ by weave, because the threads move and flatten.
Why does hopsack slip more easily than a twill with the same float?
Hopsack 2/2 and twill 2/2 have the same average float. In measurements on wool fabrics of the same yarn and setting, however, the seam opened much wider in hopsack 2/2 than in twill 2/2 (4.46 against 2.70 mm), almost as wide as in a 6-end warp satin (4.84 mm) (Malčiauskienė et al. 2011). The source explains this by neighbouring threads with the same interlacing closing up and acting like one thread. Figures based on the float alone do not cover such groups of threads.
What can I do with the app?
You compare weaves of the same yarn at the same sett or at their Ashenhurst sett, flatten the yarn and add hopsack. There are five stations with prediction questions, a magnifier with three levels of explanation and a table of figures that says for every number whether it comes from the geometry, the theory or the model.

Subject: Textiles

More from Textiles

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps