Shaft loom: threading, tie-up, treadling
About this app
A rising-shed loom in 3D and its draft: set threading, tie-up and treadling, see the drawdown as the product of the three plans and weave pick by pick. A treadle lifts several shafts, every shaft all warp ends threaded on it. Minimum number of shafts from the different warp-end columns, decompose weaves from the list, figures on twill line and selvedge.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
How the draft makes the weave
On a shaft loom every warp end runs through a heddle on exactly one shaft; the threading fixes this. The tie-up says which shafts are tied to which treadle, the treadling which treadle is pressed for which pick. The drawdown is the product of these three plans. On a rising-shed loom (jack loom) a warp end is up in a pick if a pressed treadle lifts its shaft; a treadle often lifts several shafts, and every shaft lifts all warp ends threaded on it.
What the app shows
On the left is the draft in four parts, on the right a rising-shed loom in 3D: shafts with heddles, lever system, treadles, beater with reed and shuttle, breast beam, back beam, warp beam and cloth beam, lease sticks and pawls. A pick runs in phases: shedding, picking, beating-up, shed change and now and then take-up. The figures give shafts and treadles with their minimum numbers, repeat, longest float, twill line and at how many turns the pick does not bind at the selvedge.
Try it yourself
Change only the treadling of the 2/2 twill to 1 2 3 4 3 2 and watch the twill turn into a point twill that reverses from pick to pick. Remove one cord from plain weave on four shafts: then one shaft is never lifted and its warp ends do not interlace. Decompose a weave from the list into a draft with the fewest shafts and compare the 3/3 twill with the steep twill from 3/3.
Frequently asked questions
- What is the difference between threading, tie-up and treadling?
- The threading says on which shaft each warp end lies. The tie-up connects the treadles with the shafts: which shafts are tied to which treadle. The treadling says which treadle is pressed for which pick. Together they give the drawdown.
- How many shafts does a weave need?
- At least as many as the weave has different warp-end columns in its repeat. The size of the repeat does not decide it: the steep twill from 3/3 has 6 picks in its repeat and needs 3 shafts, the 3/3 twill needs 6. In practice weavers often use more shafts so that the heddles are not too crowded.
- Can one treadle lift several shafts?
- Yes. On a rising-shed loom (jack loom) a treadle lifts all shafts tied to it, two for example in the 2/2 twill. That is why the drawdown can be read from threading and treadling alone only with a direct tie-up, one shaft per treadle.
- What can I do with the shaft loom app?
- You set cells in threading, tie-up and treadling or load examples, see the drawdown at once and weave on the 3D loom pick by pick or continuously. Prediction questions, a magnifier with three levels of explanation and figures on shafts, treadles, twill line and selvedge help you understand.
Subject: Textiles
More from Textiles
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps