Skip to content
All apps

The breathing city

About this app

Explore Berlin in 3D with official buildings and modeled urban climate: air and surface temperature, thermal stress and nighttime cooling.

Why cities run hot

Built-up areas store solar heat in stone, concrete and asphalt during the day and release it slowly at night. Sealed ground evaporates little water, and dense buildings slow the wind. The result is the urban heat island: especially at night, the air between buildings stays warmer than over parks and open land. It helps to keep the quantities apart. Air temperature is what a shaded thermometer reads, surface temperature is how hot roofs and ground are, and physiological equivalent temperature (PET) describes how air, radiation, wind and humidity together affect people.

What you see

The app shows a section of Berlin around Tempelhofer Feld, Hasenheide park and Bergmannkiez as a 3D model with about 3,500 buildings from official footprints and heights. Four climate layers from the Berlin Environmental Atlas climate analysis 2022 sit on top: air temperature, surface temperature and PET at 14:00, plus night air at 04:00. The values come from a modelled summer day and are block averages, not live measurements. Particles trace the cool night-air flow along the official 04:00 wind field.

Things to try

Put place A on the open field and place B in the dense neighbourhood, then read the difference B − A. Switch layers and you will see that the gap in surface temperature at 14:00 differs from the gap in night air at 04:00. Each layer has its own colour scale, so compare places within one layer rather than colours across layers.

Frequently asked questions

What is an urban heat island?
An urban heat island is a city that is warmer than its surrounding countryside. The causes are heat stored in buildings and roads, little evaporation from sealed surfaces, waste heat and reduced wind. The difference is usually largest on clear, calm summer nights.
What is the difference between air temperature and surface temperature?
Air temperature is measured in the shade about two metres above the ground. Surface temperature is how warm a roof, road or lawn itself is, and in sunshine it can be far above the air temperature. A hot surface therefore does not automatically mean equally hot air.
What does PET mean in urban climate studies?
PET stands for physiological equivalent temperature. It combines air temperature, solar and thermal radiation, wind and humidity into one value that describes how stressful the heat is for the human body. A sunny, sheltered square can have a much higher PET than a shady park at the same air temperature.
Where does the data in the app come from?
The climate values come from the Berlin Environmental Atlas climate analysis 2022, the buildings from official footprints and heights. They represent a modelled summer day averaged over city blocks, not current measurements. Sources and licences are linked in the app under “Data & sources”.

Subject: Geography & earth science

More from Geography & earth science

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps