Skip to content
All apps

Harmonic overhang (Brick Stacking)

About this app

Build an arbitrarily large overhang with N equally sized bricks — the harmonic series becomes visible as a growing stack. Slider up to N = 10,000, auto-frame, centre-of-mass display.

The problem

How far can a stack of identical bricks reach beyond the edge of a table without toppling? If, working from the top down, each brick is placed so that the centre of mass of all bricks above sits exactly on its edge, the k-th brick from the top sticks out 1/(2k) brick lengths beyond the one below. The total overhang is ½·H_N, where H_N = 1 + ½ + ⅓ + … + 1/N is the harmonic series. Because the harmonic series diverges, the overhang can be made as large as you like.

What the app shows

A 3D stack sits on a table edge, and a plumb line shows where the overall centre of mass lies: exactly at the edge. A slider sets N from 1 to 10,000, and auto-frame keeps the growing tower in view. The values panel shows N and the overhang, the Σ panel the sum as a formula. In the target panel you set a desired overhang and see how many bricks it takes. Pivot markers can be switched on and off.

What to look for

Four bricks already reach more than one full brick length out, since ½·H₄ = 25/24. After that it gets expensive: each extra half brick of overhang needs roughly e times as many bricks as before, because H_N grows like ln N. With 10,000 bricks the stack reaches just under 5 brick lengths. Turn on the pivots and check that every sub-stack balances right on top of its base.

Frequently asked questions

How far can a stack of blocks overhang a table?
With one block per level, placed optimally, N blocks reach ½·H_N block lengths beyond the edge, where H_N is the N-th harmonic number. Since H_N grows without bound, any overhang is possible in principle, but it takes a great many blocks.
Why does the harmonic series diverge?
Group the terms into blocks: ½, then ⅓ + ¼ > ½, then ⅕ through ⅛ > ½, and so on. Each block contributes more than ½ and there are infinitely many blocks. So the sum exceeds every bound, although it grows only about like ln N.
How many blocks do you need for an overhang of one block length?
Four blocks are enough: ½·(1 + ½ + ⅓ + ¼) = 25/24, slightly more than one block length. Three blocks give only 11/12.
What can I adjust in the app?
You choose the number of bricks N up to 10,000 and see the stack, the overhang and the sum formula. In the target panel you set a desired overhang and read off how many bricks it requires.

Subject: Analysis (one-dimensional)

More from Analysis (one-dimensional)

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps