Woodblock printing
About this app
A Japanese colour woodblock print after Hokusai's "Great Wave" is built up pass by pass: key block first, then a separate mirror-inverted block for each colour, inked, laid against the registration marks (kentō) and rubbed with the baren. Layers can be switched off one by one, the registration marks removed and the stack of blocks and colour layers opened. The picture only exists in the stack; each block carries a single colour.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
How a colour woodblock print is made
A Japanese colour woodblock print (nishiki-e) is made in several printing passes. Each colour has its own block in which only the areas of that colour stand in relief; the key block with the outlines is printed first, followed by the colour blocks. Because the paper lies face down on the block, every block is cut in mirror image. Registration marks called kentō sit in the same place on every block: a corner notch and a straight guide along the long edge. The printer aligns the paper against them on every pass so that all layers match. Designer, carver, printer and publisher shared the work.
What the app shows
A 3D workshop with wooden blocks, a sheet of paper, a baren, a brush and ink dishes. A simplified design after Hokusai’s Great Wave off Kanagawa is printed in six passes: outline, light blue, dark blue, beige, grey and sky. Each pass shows inking, placing the paper against the kentō, rubbing with the baren and lifting. Individual layers can be hidden, the stack of blocks and colour layers can be opened up, and a mirror axis shows the reversal. A panel explains the roles of designer, carver, printer and publisher.
Try it yourself
Play all printing passes and notice that the picture only exists once all layers are stacked; each block contributes a single colour. Then switch off the registration marks and print again: the paper lands slightly differently each time, leaving white gaps and overlaps against the outlines. Open the stack to see each block in mirror image next to the correctly oriented layer it prints. The bokashi slider sets whether the sky gets a hard edge or a long, soft gradient.
Frequently asked questions
- How does Japanese woodblock printing work?
- A separate wooden block is cut for each colour, with only the areas of that colour left in relief. The printer inks one block after another, lays damp paper on top and rubs it with a baren. Only the layers printed on top of each other make up the finished picture.
- What are kentō in woodblock printing?
- Kentō are registration marks cut in the same position on every block: a corner notch (kagi) and a straight guide along the long side (hikitsuke). The printer places the paper against them on every pass. This keeps all colour layers in register.
- What is bokashi?
- Bokashi is the term for colour gradients in Japanese woodblock prints. They are made by hand while inking, by spreading the pigment unevenly with a damp brush or wiping part of it away. Gradients in the sky or water are typical examples.
- What does the woodblock printing app show?
- It shows how a colour woodblock print after Hokusai’s Great Wave is made in six passes. You can hide layers, switch off the registration marks, open the stack of blocks and layers and adjust the bokashi gradient. The design is a simplified drawing of its own, not a reproduction.
Subject: Art
More from Art
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps