Köhlern in sechs Handgriffen (3D)
About this app
Köhlersche Beleuchtung am Labormikroskop: scharf stellen, Leuchtfeldblende schließen, Kondensor in der Höhe einstellen, zentrieren, öffnen und die Aperturblende in der Objektivpupille auf 70 bis 80 Prozent der NA setzen. Bei jedem Handgriff der Blick durchs Okular, berechnet aus der Wellenoptik.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
What Köhler illumination does
Köhler illumination, described by August Köhler in 1893, images the field diaphragm sharply into the specimen plane and the light source into the plane of the aperture diaphragm. The field of view is then evenly lit, and the two diaphragms act separately: the field diaphragm limits the illuminated area and thus stray light, while the aperture diaphragm sets the angle of illumination and thus contrast against resolution.
The steps
First focus the specimen with the 10× objective. Then close the field diaphragm until its polygon appears in the field of view and move the condenser up or down until the edge is sharp. Use the centring screws to move the polygon to the centre and open the diaphragm until its edge just leaves the field. Finally set the aperture diaphragm to about 70 to 80 percent of the objective NA, ideally while looking into the objective pupil.
Things to try
The app starts out of adjustment: condenser too low and off centre, the field dull and unevenly lit. Every step is done directly on the 3D microscope, and the matching control lights up. The eyepiece image is calculated from wave optics, with the image of the field diaphragm on top. A switch shows the objective pupil with the image of the aperture diaphragm.
Frequently asked questions
- Does the aperture diaphragm control brightness?
- No. The aperture diaphragm sets the illumination aperture and thus contrast, resolution and depth of field. Closing it further increases contrast but loses fine detail. Brightness is set at the lamp.
- How far should the aperture diaphragm be closed?
- As a rule of thumb, to about two thirds to four fifths of the objective’s numerical aperture. It is most accurate while looking into the objective pupil, through a Bertrand lens or with the eyepiece removed: the edge of the iris should just reach into the bright pupil.
- Do you need to redo Köhler illumination after changing objectives?
- Condenser height and centring stay, but field and aperture diaphragm need readjusting: the field of view is smaller with a stronger objective, and the right illumination aperture depends on the objective’s NA.
- What can I do in this app?
- You set up Köhler illumination on a lab microscope in six steps, see the eyepiece image and the objective pupil after each step, compare contrast and resolution at different diaphragm settings and then change the objective to readjust.
Subject: Physics
More from Physics
- Cavendish-Experiment: die Erde wiegen (3D)
- Das Lichtmikroskop (3D)
- Der eingefrorene Wasserstrahl (3D)
- Die Riesenspinne an der Wand (3D)
- Double slit — observer on, pattern gone (3D)
- The double-slit experiment
- Real collisions from the LHC (3D)
- Handpan — physics, mechanics and construction (3D)
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps