Beam internal forces (N, V, M)
About this app
Beam with loads and a section slider: axial force N, shear V and bending moment M at the cut plus the axis-aligned diagrams N(x), V(x), M(x) (dV/dx=−q, dM/dx=V).
The basics
Internal forces are the forces and moments a beam transmits across an imaginary cut. In the plane these are the normal force N along the axis, the shear force Q (often written V) across it, and the bending moment M. You find them by cutting the beam at x and applying equilibrium to one of the two parts. Distributed load, shear and moment are linked by dQ/dx = −q and dM/dx = Q. As a result, the bending moment has an extremum where the shear force is zero, and a point load causes a jump in Q and a kink in M.
What the app shows
A beam on a pin support A and a roller B carries a movable point load F, a distributed load q and an axial load Hₓ. A section slider cuts the beam at x; at the cut the app shows N, Q and M with their values. Below the beam, the diagrams N(x), Q(x) and M(x) are aligned with the beam axis, so every position can be compared directly. The support reactions A and B are computed as well.
Things to try
Slide the section across the point load and watch the jump in the shear diagram and the kink in the moment diagram. The “q only” example shows a linear shear diagram and a parabolic moment with its maximum at mid-span. Move the point load and look for the position where Q changes sign: that is where the largest bending moment occurs.
Frequently asked questions
- What are internal forces in a beam?
- Internal forces are the stress resultants inside a member: normal force N, shear force Q (or V) and bending moment M, plus torsion and further components in 3D. They become visible when you cut the member and apply equilibrium to one of the pieces.
- How are shear force and bending moment related?
- The derivative of the bending moment with respect to x is the shear force, dM/dx = Q, and the derivative of the shear force is the negative distributed load, dQ/dx = −q. That is why M has an extremum where Q is zero. Under a uniform load, Q is linear and M is a parabola.
- Where is the maximum bending moment in a simply supported beam?
- It occurs where the shear force is zero or changes sign. For a central point load F on a span L it is at mid-span and equals F·L/4. For a uniform load q it is also at mid-span and equals q·L²/8.
- Which loads can I set in the internal forces app?
- You set the magnitude and position of a point load F, a distributed load q and an axial load Hₓ, and you move the section along the beam. Three presets (Standard, q only, F centred) give a starting point. The app shows N, Q and M at the cut and the complete diagrams.
Subject: Engineering mechanics
More from Engineering mechanics
- Bending stress & moment of inertia
- Düsenjet bis v_max (3D)
- Energy & oscillation
- Truss analysis (method of joints)
- Equilibrium & support reactions
- Kinematics
- Kinetics & Newton's second law
- Forces & vector addition
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps