Chladni sound figures (3D)
About this app
Tones made visible: a vibrating metal plate (square or circle) arranges scattered sand into delicate eigenmode patterns along the nodal lines. Adjust the frequency, find resonances — finer patterns at higher modes.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
How sound becomes visible
In 1787 Ernst Chladni described how sand on a vibrating metal plate arranges itself into patterns. A plate vibrates strongly only at certain eigenfrequencies. A standing wave then forms with fixed nodal lines, where the plate does not move, and antinodes of maximum displacement between them. The sand is thrown off the antinodes and stays on the nodal lines. Higher eigenfrequencies belong to higher modes with more nodal lines and finer patterns.
What the app shows
A square or round metal plate is set vibrating and visibly deforms into its eigenmode. Scattered sand moves onto the nodal lines in real time. For the square plate the pattern follows cos(nπx)·cos(mπy) ± cos(mπx)·cos(nπy) with mode numbers n and m. On the round plate, nodal circles and nodal diameters appear. The app snaps to the nearest eigenfrequency and shows whether the plate is at resonance.
What you can try
Change the frequency between 80 and 1240 Hz and watch a new pattern form at every resonance. Switch between the square and the round plate and compare the shapes of the nodal lines. “Re-scatter sand” spreads the sand randomly again so you can watch the figure build up from scratch. The patterns are clearest from the top-down view.
Frequently asked questions
- What are Chladni figures?
- Chladni figures are patterns that sand forms on a vibrating plate. At an eigenfrequency the plate vibrates as a standing wave, and the sand collects on the nodal lines where the plate does not move. They are named after the physicist Ernst Chladni, who published them in 1787.
- Why does the sand gather on the nodal lines?
- At the antinodes the plate moves strongly up and down and throws the grains up and sideways. On the nodal lines the displacement is zero, so a grain stays put. Over time almost all the sand ends up on the nodal lines and traces the shape of the vibration.
- What are plate eigenmodes used for in practice?
- Eigenmodes determine how bells, drumheads, guitar tops and violin plates sound. Instrument makers use them to check how a top vibrates, and engineers test components for resonances that could cause noise or material fatigue.
- What can I try out in this app?
- You set the frequency, find the plate’s eigenfrequencies, switch between a square and a round plate and re-scatter the sand. The plate visibly deforms into its mode, and the sand arranges itself into the figure live.
Subject: Physics experiments (Deutsches Museum)
More from Physics experiments (Deutsches Museum)
- Benz Patent-Motorwagen 1886 — the four-stroke in section (3D)
- Mine through time (3D)
- Bohr atomic model & spectral lines (3D)
- Steam engine (3D)
- First diesel engine 1897 — ignition by compression (3D)
- Foucault pendulum (3D)
- High-voltage installation — artificial lightning (3D)
- Nuclear fission 1938 — from the lab bench to E = mc² (3D)
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps