Steam engine (3D)
About this app
A running cutaway model: glass cylinder with piston, crosshead, connecting rod, slide valve and a large spoked flywheel — driven via the slider crank. Steam supply and load adjustable; Watt's centrifugal governor holds the speed automatically (feedback). Steam plumes on the exhaust beat.
How a steam engine works
A reciprocating steam engine turns the energy of pressurised steam into rotation. A slide valve lets steam flow alternately onto both sides of the piston, so the engine is double-acting. Via crosshead and connecting rod the piston drives the crank, and a heavy flywheel smooths the uneven force with its inertia. Piston travel follows the slider-crank relation x = r·cos θ + √(L² − r²·sin² θ). James Watt used a centrifugal governor that automatically throttles the steam as the speed rises.
What the app shows
The model runs: a glass cylinder shows the piston, above it sits the valve chest with a slide valve leading by 90°. Crosshead, connecting rod and crank drive a large spoked flywheel. At the back the centrifugal governor turns, driven by a belt. Clouds of steam escape on each exhaust stroke. The readout gives speed, current stroke, governor position and the share of steam actually admitted.
What you can try
Open the steam supply and watch the flywheel spin up. Then increase the load: the speed drops at first, the governor balls fall inward and open the valve further until the speed settles again. Remove the load and the balls fly outward and throttle back. This lets you watch automatic feedback control on a running model.
Frequently asked questions
- How does James Watt’s centrifugal governor work?
- Two balls on pivoting arms rotate with a spindle driven by the engine. As speed rises, centrifugal force pushes the balls outward and upward, and a linkage closes the steam valve a little. As speed falls, the balls drop and open the valve. It is an early feedback controller that keeps the speed nearly constant under changing load.
- Why does a steam engine need a flywheel?
- The piston does not push evenly on the crank; at the dead centres it delivers no torque at all. The heavy flywheel stores kinetic energy, carries the crank through the dead centres and smooths the speed over each revolution.
- What does double-acting mean in a steam engine?
- In a double-acting engine the piston receives steam alternately on both sides: once it pushes forward, once back. The slide valve controls which side gets live steam and which side exhausts. Every stroke does work, so the engine delivers roughly twice the output of a single-acting engine of the same size.
- What can I try out in this app?
- You set steam supply and load and watch piston, slide valve, crank, flywheel and centrifugal governor on the running cutaway model. Speed, stroke, governor position and effective steam are shown live.
Subject: Physics experiments (Deutsches Museum)
More from Physics experiments (Deutsches Museum)
- Benz Patent-Motorwagen 1886 — the four-stroke in section (3D)
- Mine through time (3D)
- Bohr atomic model & spectral lines (3D)
- Chladni sound figures (3D)
- First diesel engine 1897 — ignition by compression (3D)
- Foucault pendulum (3D)
- High-voltage installation — artificial lightning (3D)
- Nuclear fission 1938 — from the lab bench to E = mc² (3D)
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps