Circular Economy — R-strategies
About this app
An interactive 3D scene on the circular economy: a linear chain Take → Make → Use → Waste with a live-flowing material particle stream, in which all ten R-strategies (R0 Refuse to R9 Recover) return material as switchable loops — tight loops inside, wide ones outside. The balance shows live the primary-material input, landfill waste and circularity rate compared to the linear chain.
From linear to circular
A linear economy follows take → make → use → waste: resources are extracted, processed, used and discarded. The circular economy aims to keep materials in use for as long as possible. The R-ladder ranks the strategies by priority, from R0 Refuse through Rethink, Reduce, Reuse, Repair, Refurbish, Remanufacture and Repurpose to R8 Recycle and R9 Recover. The rule of thumb: the shorter and tighter the loop, the more value is retained. R0 to R2 narrow the material flow, R3 to R7 slow it down and R8 closes it.
What the app shows
A 3D chain of extraction, production and use carries a flowing stream of material particles. All ten strategies can be switched on as loops, grouped into “smarter product use and manufacture”, “extend product lifespan” and “useful application of materials”. Tight loops sit on the inside, wide ones on the outside. The balance panel shows virgin material input, landfill waste, circularity rate and energy recovery live, compared with the linear chain at 100 % virgin material, 100 % waste and 0 % circularity.
Things to try
Start with R8 Recycle alone, then add Reuse or Repair: virgin input on the left and landfill output on the right shrink, and the inner loops take load off recycling. Turn on R9 Recover and note that it only recovers energy; the material is lost to the cycle. Each strategy comes with a short explanation, for example that remanufacturing uses parts of a discarded product in a new product with the same function.
Frequently asked questions
- What are the R-strategies of the circular economy?
- The R-strategies are a ranked list of measures for keeping materials in circulation: Refuse, Rethink, Reduce, Reuse, Repair, Refurbish, Remanufacture, Repurpose, Recycle and Recover (R0 to R9). Strategies higher on the list retain more of the original value. Recover means energy recovery, where the material itself is lost.
- What is the difference between refurbishing and remanufacturing?
- Refurbishing restores and updates an older product, which essentially stays the same product. Remanufacturing uses parts of a discarded product in a new product with the same function. It therefore goes deeper into how the product is built.
- Why is recycling not the best circular strategy?
- Recycling breaks a product down into its materials, so its shape and the work embodied in making it are lost, and the process itself has losses. Reusing or repairing keeps the whole product. That is why recycling ranks low on the R-ladder, just above energy recovery.
- What does the balance panel in the app show?
- It compares four quantities with the linear chain: virgin material input, landfill waste, circularity rate and energy recovery. The bars react immediately when you switch a strategy on or off. Active loops divert material after use, inner loops before outer ones.
Subject: Logistics & Supply Chain
More from Logistics & Supply Chain
- AAS & digital product passport
- Autonomous traffic in logistics systems (3D)
- Stock & service level
- Blockchain traceability
- Bullwhip effect
- Digital Twin level model
- Bottleneck & throughput (3D)
- Forecasting playground
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps