Bottleneck & throughput (3D)
About this app
A 3D production line with five stations shows that the bottleneck alone sets throughput: speeding up other stations only grows inventory and lead time. Drum-buffer-rope ties material release to the bottleneck and lowers inventory at the same throughput.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
The idea
A production line can never deliver more than its slowest station, the bottleneck. Speed up any other station and throughput stays the same; only the pile in front of the bottleneck grows, so inventory and lead time increase. Little’s Law captures this: inventory = throughput × lead time. The Theory of Constraints concludes that the whole line should be managed around the bottleneck. In drum-buffer-rope, the bottleneck sets the pace (drum), a small buffer keeps it from starving, and a rope ties material release to its consumption.
What you see
Five machines stand in a 3D hall: cutting, turning, hardening, assembly and inspection. Each has a capacity slider from 10 to 120 pieces per hour with its utilisation next to it. The bottleneck is highlighted in sand colour, and workpieces get a stronger colour with every processing step. The metrics panel shows throughput, inventory, lead time and the current bottleneck, a chart of the last four simulated hours, and a Little’s Law check comparing inventory divided by throughput with the measured lead time.
Things to try
Set station 1 to 120 pieces per hour: output stays flat while the queue in front of hardening keeps growing. Then raise the hardening capacity and follow the bottleneck to its new place. Finally switch from push to drum-buffer-rope, where new material only enters the line when the bottleneck starts a part. Inventory drops while throughput holds. “Empty line” and “Reset” start over, and the simulation speed is adjustable.
Frequently asked questions
- What is a bottleneck in manufacturing?
- The bottleneck is the resource with the least capacity relative to its load, the station that limits the throughput of the entire line. Every hour the bottleneck is idle is lost for the whole system. Faster stations before or after it do not raise output.
- What does Little’s Law say?
- Little’s Law links three averages of a stable system: inventory = throughput × lead time (L = λ · W). At constant throughput, more inventory therefore means a longer lead time. It holds regardless of how processing times are distributed, as long as the system is stable on average.
- How does drum-buffer-rope work?
- Drum-buffer-rope is the scheduling method of the Theory of Constraints. The bottleneck sets the rhythm (drum), a time or quantity buffer in front of it prevents starvation (buffer), and material release at the start of the line is tied to the bottleneck’s consumption (rope). Throughput is kept while work in process stays limited.
- What can I adjust in the app?
- You set the capacity of each of the five stations, choose between push and drum-buffer-rope and change the simulation speed. Metrics and charts show live how throughput, inventory and lead time respond. A guided mode with an AI tutor walks you through the app.
Subject: Logistics & Supply Chain
More from Logistics & Supply Chain
- AAS & digital product passport
- Autonomous traffic in logistics systems (3D)
- Stock & service level
- Blockchain traceability
- Bullwhip effect
- Circular Economy — R-strategies
- Digital Twin level model
- Forecasting playground
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps