Differential gear — bevel differential and lock (3D)
About this app
Cornering, ice and a locked differential on a rear axle: the spider gears let the wheel speeds differ, n_L + n_R = 2 · n_carrier, and split the torque equally. On ice one wheel spins until the lock is engaged.
How a differential works
In a curve the outer wheel travels further than the inner one, so the two wheels of an axle must be allowed to turn at different speeds. In an open bevel-gear differential, the pinion on the propeller shaft drives the ring gear and with it the differential carrier. Inside the carrier, spider gears mesh with both side gears. The relation n_L + n_R = 2 · n_carrier holds: the carrier speed is the average of the wheel speeds. At the same time an open differential splits the drive torque equally between the wheels. That is its weakness: the wheel with less grip limits the torque on both sides.
What the app shows
A 3D model of a driven rear axle with pinion, ring gear, carrier, cross pin, two spider gears and the side gears. Five scenarios are ready: straight, curve, ice, ice with lock and curve with lock. The values panel shows the speeds of both wheels, the carrier and the propeller shaft, plus the torque at each wheel against the maximum transferable torque μ · F_N · r. A top view draws the wheel tracks, and the axle housing can be shown as glass, cut open or closed. Tap any part for an explanation.
Things to try
Start by driving straight and watch the spider gears stay still relative to the carrier. Switch to a curve and tighten the radius: the spider gears start turning on their pin and the outer wheel speeds up. Then put one wheel on ice. It spins, and both wheels only get the small torque the ice allows. Engage the lock and compare: equal speeds, and the wheel with grip takes over the torque. In a curve with the lock engaged, the app shows the tyres scrubbing and the driveline winding up.
Frequently asked questions
- Why does a car need a differential?
- In a curve the wheels of one axle cover different distances and therefore have to turn at different speeds. Without a differential both wheels would be rigidly coupled, the tyres would scrub and the driveline would wind up. The differential balances the speeds while still driving both wheels.
- Why does one wheel spin on ice with an open differential?
- An open differential always splits the torque equally between the two wheels. If the wheel on ice can only transfer a small torque, the wheel with grip also receives only that small torque. The wheel on ice spins at twice the carrier speed while the other wheel stands still.
- What does a differential lock do?
- A lock couples both sides so that the wheels turn at the same speed. The wheel with grip can then take a larger torque than the wheel on ice. On a grippy road in a curve, however, a lock makes the tyres scrub and stresses the driveline, so it is usually released there.
- How realistic is the model in the app?
- The app assumes a 1400 kg vehicle, an axle ratio of 41 : 11 and a simple slip curve for the tyre force. Internal friction, load transfer and the engine map are neglected, and the gears are drawn with straight teeth. Production axles usually use spiral or hypoid bevel gears.
Subject: Automotive engineering
More from Automotive engineering
- ABS und Bremsschlupf
- Achsvermessung (3D)
- CAN-Bus am Oszilloskop
- Frontkamera kalibrieren (ADAS, 3D)
- Hochvolt-Fahrzeug freischalten (3D)
- Motor im Schnitt — Honda GX160 (3D)
- Porsche 911 — exploded view (3D)
- Spannungsfall unter Last
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps