Friction & inclined plane
About this app
Block on an inclined plane: angle α, static friction coefficient μ and mass via slider, forces (weight, normal, downslope, friction) as vectors; slides when tanα>μ (angle of repose ρ=arctan μ).
The physics
On a plane inclined at α, the weight m·g splits into two parts: the downhill component F_H = m·g·sin α parallel to the plane and a component perpendicular to it, balanced by the normal force F_N = m·g·cos α. Static friction opposes the downhill component but can supply at most F_R,max = μ·F_N. The block stays put as long as F_H ≤ μ·F_N, which means tan α ≤ μ. The limiting angle ρ = arctan μ, also called the angle of repose, depends only on the coefficient of friction, not on the mass.
What you see
A block rests on a plane whose inclination you set. Weight, normal force, downhill force and static friction are drawn as vectors with their magnitudes in newtons. A status display tells you whether the block holds or slides and states the sliding condition. You can show the limiting angle ρ to compare it with the current inclination.
Things to try
Raise the angle slowly until the block starts to slide, then compare that angle with ρ. Next change the mass: every force grows in proportion, and the limiting angle stays the same. Only a different coefficient μ moves the tipping point. Notice also that static friction is only as large as it needs to be while the block holds.
Frequently asked questions
- When does a block start sliding down an incline?
- It slides once the downhill force exceeds the maximum static friction: m·g·sin α > μ·m·g·cos α. The mass cancels, leaving tan α > μ. The limiting angle is therefore ρ = arctan μ.
- How do you calculate the downhill force and the normal force on an incline?
- The downhill force is F_H = m·g·sin α and the normal force is F_N = m·g·cos α, where α is the angle of the incline and g ≈ 9.81 m/s². At α = 0 the downhill force is zero and the normal force equals the weight. As the incline steepens, F_H grows and F_N decreases.
- Why does the angle of repose not depend on mass?
- Both the downhill force and the maximum static friction are proportional to the weight m·g. Doubling the mass doubles both forces, so their ratio stays the same. Only the ratio of tan α to μ matters.
- What can I set in the inclined plane app?
- You set the angle α, the coefficient of static friction μ and the mass m with sliders, and you can show the limiting angle ρ. The app draws all forces as vectors with magnitudes and indicates whether the block holds or slides. There is no separate coefficient of kinetic friction; once the block slides, the app sets friction to μ·F_N.
Subject: Engineering mechanics
More from Engineering mechanics
- Bending stress & moment of inertia
- Düsenjet bis v_max (3D)
- Energy & oscillation
- Truss analysis (method of joints)
- Equilibrium & support reactions
- Kinematics
- Kinetics & Newton's second law
- Forces & vector addition
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps