Skip to content
All apps

Gaudí's hanging model (3D)

About this app

Chains with weight bags find the shape of pure tension by themselves; inverted they become a stone arch in pure compression, while the semicircle next to it cracks at the marked points. Single arch, a row of arches and the chain net of the Colònia Güell. Exhibit-ready.

With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.

As hangs the chain, so stands the arch

A hanging chain can only take tension. Under its own weight it forms the catenary, under point loads a polygon with kinks at the loads. In 1675 Robert Hooke wrote: as hangs the flexible line, so but inverted will stand the rigid arch. Mirror the shape and pure tension turns into pure compression, with the thrust line exactly on the axis of the arch. Antoni Gaudí designed the crypt of the Colònia Güell from 1898 with a hanging model of chains and bags of shot and used the principle for the Sagrada Família as well.

What the app shows

Chains hang below a top plate and settle under gravity. You can choose a single arch, a row of four arches with spans from 0.55 to 1.15 m, and a chain net like Gaudí’s Colònia Güell model with a main arch, six spokes and ring arches. A button inverts the shape into an arch of voussoirs. On request a semicircular arch of the same span stands beside it; red points show where its best possible thrust line leaves the cross-section. Readouts give rise to span and horizontal thrust to load.

What you can try

Change the chain length: a longer chain hangs lower, and the inverted arch becomes steeper and pushes outwards less. Hang up to seven bags on each chain and make them heavier, and the chain kinks at the loads. Drop the chains again and watch them settle. Then compare the inverted catenary with the semicircle: one carries its load with the thrust line on the axis, the other cracks at the marked points.

Frequently asked questions

How did Gaudí’s hanging model work?
Gaudí hung chains or strings with small bags of lead shot from a board, with the bags standing in for the loads of the future building. The strings settle by themselves into shapes that carry only tension. Turn that shape upside down, for example via a mirror or an inverted photo, and you get arches and vaults that carry the same loads in pure compression. This is how the crypt of the Colònia Güell was designed from 1898.
Why is the inverted catenary the ideal arch shape?
A hanging chain has no bending stiffness and can only transmit tension along its axis. Its shape is exactly the one in which the loads are carried without bending. Mirror it and all forces reverse: tension becomes compression and the thrust line lies on the axis of the arch. For masonry, which only tolerates compression, this is the most favourable shape for that particular load distribution.
Isn’t the semicircle the most stable arch?
No. Under its own weight the thrust line of a semicircular arch deviates from its axis and runs outwards at the flanks. If the arch is too thin, the line leaves the cross-section and hinges form; according to Heyman a semicircular arch needs a minimum thickness of about 0.107 of its radius. The inverted catenary needs far less material because its thrust line lies on its axis.
What can I try in the Gaudí hanging model app?
You choose an arch, a row of arches or the Colònia Güell chain net, set chain length and the number and weight of the bags, and drop the chains. A button inverts the shape into a stone arch. Comparing it with a semicircle of the same span shows with red points where the semicircle’s thrust line leaves the cross-section.

Subject: Architecture & scenography

More from Architecture & scenography

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps