Skip to content
All apps

Torsion

About this app

Twisted shaft in 3D: shear stress τ=T·r/I_p (linear over the radius) and twist angle φ=T·L/(G·I_p); sliders for torque T, length L and shear modulus G, the surface lines twist.

The basics

A shaft loaded by a torque T twists: cross-sections rotate relative to each other and initially straight surface lines become helices. In a circular section the shear stress grows linearly with the radius: τ(r) = T·r/J, where J (written I_p in the app) is the polar moment of area. It is zero at the centre and largest at the surface, τ_max = T·R/J. For a solid shaft of radius R, J = π·R⁴/2. The angle of twist over a length L is φ = T·L/(G·J), with G the shear modulus of the material. G·J is called the torsional stiffness.

What you see

A solid shaft is clamped on the left, and the torque T acts on the free end. In 3D you see the surface lines tilt and the twist build up along the length. The colour of the cross-section shows the shear stress, small inside and large outside. A panel lists the angle of twist φ, the maximum shear stress τ_max and the polar moment I_p and sketches the linear stress distribution over the radius.

Things to try

Increase the torque and watch the angle of twist and the shear stress grow in proportion. A longer shaft twists more while the shear stress stays the same. A larger shear modulus G stands for a stiffer material and reduces the twist. Drag to rotate the view. The shaft radius is fixed in the app.

Frequently asked questions

How do you calculate torsional shear stress in a shaft?
For a circular section τ(r) = T·r/J. The maximum shear stress occurs at the surface: τ_max = T·R/J = T/W_p, with the polar section modulus W_p = π·R³/2. At the centre of the shaft the shear stress is zero.
How large is the angle of twist of a shaft?
The angle of twist is φ = T·L/(G·J) in radians. It grows with torque and length and decreases with shear modulus and polar moment of area. For steel, G is about 80 GPa.
Why are hollow shafts efficient in torsion?
Shear stress is small near the centre and large at the surface, so material near the centre contributes little to torsional resistance. A hollow shaft leaves out that material and reaches a similar polar moment of area at a lower weight.
What can I set in the torsion app?
You set torque T, shaft length L and shear modulus G with sliders and rotate the 3D view with mouse or finger. The app shows the angle of twist, the maximum shear stress and I_p. The radius of the solid shaft is fixed.

Subject: Engineering mechanics

More from Engineering mechanics

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps