Voron 2.4 — exploded view (3D)
About this app
The real, fully open-source CAD design of a Voron 2.4 CoreXY 3D printer (self-build) as an interactive exploded view: 9 toggleable assemblies, hundreds of clickable real parts, animated explode cascade, see-through panels and a guided assembly tour. Shows the "flying" gantry and the CoreXY principle.
What sets the Voron 2.4 apart
The Voron 2.4 is an open-source 3D printer you build yourself, with its design freely available. It uses CoreXY kinematics: two stationary motors move the light print head in the XY plane through crossed belts. Its defining feature is the “flying” gantry. The bed stays fixed while the whole gantry carrying the print head moves up and down in Z. The frame is made of aluminium extrusions, panels enclose the build chamber, and the electronics sit in a bay in the base.
What you see
The app loads the real CAD design of the Voron 2.4 with a very large number of individual parts. They are coloured by assembly: gantry (CoreXY), Z drive, electronics, skirt as the base, frame, heated bed, panels, spool holder and exhaust filter. A slider pulls everything apart along its assembly direction, and assemblies can be toggled one by one. Tapping a part shows its name and assembly. The panels can be made transparent, a turntable rotates the model, and a guided tour presents each assembly.
Things to try
Hide the frame, panels and skirt, and keep only the gantry, Z drive and heated bed. You can see that on the Voron the gantry travels in height while the bed stays in place. Then open the explode slider and follow the gantry belts to the two motors. Show the electronics bay in the base to see where mainboard and power supplies are housed.
Frequently asked questions
- What is a flying gantry on a 3D printer?
- With a flying gantry the whole gantry carrying the print head moves in Z, while the print bed stays fixed in the frame. The Voron 2.4 is a well-known example. The often heavy heated bed therefore does not have to move.
- How does CoreXY kinematics work?
- Two stationary motors drive two belts that cross over pulleys to the print head. If only one motor turns, the head moves diagonally; if both turn in the same or opposite direction, it moves in X or Y. Because the motors do not travel, the moving mass stays low.
- What does open-source hardware mean for 3D printers?
- With open-source hardware, design files, bills of materials and often the firmware are public and usable under an open licence. Anyone can build the printer, modify it and source or print the parts themselves.
- Why does the app use the Voron CAD data?
- Because the design is openly licensed, the app can show the actual parts. Every coloured part comes from the design. That makes it possible to show on a real machine how CAD data becomes an interactive manual.
Subject: Devices & operating manuals
More from Devices & operating manuals
- EUV lithography — how chips are exposed (3D)
- Perseverance rover — exploded view (3D)
- Prusa CORE One — exploded view (3D)
- Smartphone im Inneren — Explosionszeichnung (3D)
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps