Skip to content
All apps

Alternating current: sine & RMS

About this app

Sine voltage u(t) = û·sin(ωt+φ): amplitude, frequency and phase via slider, a rotating phasor couples to the unrolling sine curve; RMS value U_rms = û/√2, period T and peak-to-peak marked.

Sine, phasor, RMS

A sinusoidal AC voltage is described by u(t) = û·sin(ωt + φ), with peak value û, angular frequency ω = 2π·f and phase angle φ. One period lasts T = 1/f. The RMS value U_rms = û/√2 ≈ 0.707·û is the DC voltage that would produce the same heating power in a resistor. The 230 V of European mains is an RMS value; the peak is about 325 V. The arithmetic mean of a pure sine voltage over one period is zero.

What the app shows

On the left a phasor of length û rotates; on the right its height unrolls as a sine curve. One full turn equals exactly one period. The chart marks the instantaneous value u(t), the ±U_rms lines, the peak-to-peak range and the zero mean. A readout panel lists peak value, RMS value, peak-to-peak value, frequency, period, angular frequency and mean.

Things to try

Set the amplitude between 40 and 325 V, the frequency between 10 and 200 Hz and the phase between −180° and +180°. A button resets everything to European mains: 230 V RMS at 50 Hz. Double the frequency and watch the period halve. Change the phase: the curve shifts, while the peak and RMS values stay the same.

Frequently asked questions

What is the RMS value of an AC voltage?
The RMS (root mean square) value is the DC voltage that delivers the same average power to a resistor as the AC voltage. For a sine wave, U_rms = û/√2 ≈ 0.707·û. Meters and rating plates usually state RMS values.
Why is mains voltage 230 V but peaks at about 325 V?
The 230 V is the RMS value. The peak of a sine wave is larger by a factor of √2: 230 V · √2 ≈ 325 V. The peak-to-peak value between the positive and negative peak is therefore about 650 V.
How are frequency, period and angular frequency related?
The period is the reciprocal of the frequency: T = 1/f. Angular frequency is ω = 2π·f and tells how fast the phasor turns in rad/s. At 50 Hz that gives T = 20 ms and ω ≈ 314 rad/s.
What does the sine and RMS app show?
It links a rotating phasor to the sine curve u(t) and marks RMS value, peak-to-peak range and period. You set amplitude, frequency and phase with sliders, and a button sets 230 V at 50 Hz.

Subject: Electrical engineering fundamentals

More from Electrical engineering fundamentals

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps