Skip to content
All apps

Ohm's law

About this app

An interactive DC circuit with source, resistor, ammeter and voltmeter: set U and R, I = U/R live as flowing charge carriers; alongside, the U-I characteristic as a line through the origin with slope 1/R and a moving operating point.

With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.

The basics

Ohm’s law links voltage U, current I and resistance R in an ohmic conductor: U = R·I, or I = U/R. The voltage drives the charge carriers, the resistance limits the current. With constant R, current rises in proportion to voltage, so the U-I characteristic is a straight line through the origin. Its slope is the conductance G = 1/R. Resistance is measured in ohms, where 1 Ω = 1 V/A.

What you see

A DC circuit with a voltage source and a resistor, an ammeter in series and a voltmeter across the resistor. Charge carriers move visibly through the wire, denser and faster as the current grows. Next to the circuit, the U-I graph shows a line with slope 1/R and an operating point (U, I) that moves as you change the values. An explain mode can guide you through the app step by step.

Things to try

Set the voltage between 0 and 24 V and the resistance between 1 and 100 Ω. Double the voltage at fixed resistance and check on the ammeter whether the current doubles as well. Then raise the resistance: the line gets flatter, and the current drops at the same voltage. Watch how the density of moving charges follows the current.

Frequently asked questions

What does Ohm’s law state?
Ohm’s law states that the current through an ohmic resistor is proportional to the voltage across it: U = R·I. The constant of proportionality is the resistance R in ohms. It holds for components whose resistance does not depend on voltage or current, such as metal film resistors at constant temperature.
How do you calculate current from voltage and resistance?
Divide the voltage by the resistance: I = U/R. At 12 V and 6 Ω, the current is 2 A. The units work out because 1 A = 1 V/Ω.
Why is the U-I graph of a resistor a straight line?
For an ohmic resistor R is constant, so I grows linearly with U. Plotting I against U gives a line through the origin with slope 1/R. Components such as diodes or filament lamps have curved characteristics instead.
What can I change in the Ohm’s law app?
You set voltage and resistance with sliders and read voltage, resistance and current from the meters. The graph with its moving operating point shows the relationship visually, and an explain mode walks you through the controls.

Subject: Electrical engineering fundamentals

More from Electrical engineering fundamentals

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps