Electromagnetic induction
About this app
A magnet is moved through a coil: induced voltage U_ind = −N·dΦ/dt live as a plot, Lenz's rule in colour; in the second mode a rotating loop acts as a generator producing a sine voltage.
Faraday’s law
When the magnetic flux Φ through a coil changes, a voltage is induced in it. Faraday’s law reads U_ind = −N·dΦ/dt, where N is the number of turns. What matters is how fast the flux changes, not how large it is. The minus sign expresses Lenz’s law: the induced current flows so that its own magnetic field opposes the change in flux. If a wire loop rotates steadily in a magnetic field, the flux varies as a cosine and a sinusoidal AC voltage results.
What the app shows
The 3D scene has two modes. In “Magnet & coil”, a bar magnet with north and south pole moves through a coil, with magnetic flux and induced current shown in colour. In “Generator”, a wire loop rotates in a field. A readout panel shows U_ind, Φ and dΦ/dt, and a plot traces U_ind(t) live.
Things to try
Turn off automatic motion and drag the magnet through the coil with the mouse. Move it faster and the voltage swings further. Pushing it in and pulling it out gives opposite signs. Increase the number of turns (10 to 400) or the field strength and compare the peaks. In generator mode, change the rotation speed: frequency and amplitude of the AC voltage rise with it.
Frequently asked questions
- What does Faraday’s law of induction say?
- A voltage is induced whenever the magnetic flux through a loop or coil changes. The law is U_ind = −N·dΦ/dt, with N turns and flux Φ. The faster the flux changes and the more turns the coil has, the larger the voltage.
- What is Lenz’s law?
- The induced current always flows in a direction such that its own magnetic field opposes the cause of the induction. Moving a north pole towards a coil creates a north pole on that side of the coil, which repels the magnet. The law follows from conservation of energy.
- How does a generator produce alternating voltage?
- In a generator a wire loop or coil rotates in a magnetic field. The flux through the loop changes periodically, for example Φ = B·A·cos(ωt). The induced voltage is its derivative and therefore sinusoidal.
- What can I try in the induction app?
- You move a magnet through a coil by hand or automatically, set speed, number of turns and field strength, and see U_ind as a curve. In generator mode you control the rotation speed of a wire loop and watch the resulting AC voltage.
Subject: Electrical engineering fundamentals
More from Electrical engineering fundamentals
- Diode & rectifier
- Three-phase power
- Electric field & Coulomb
- Kirchhoff's laws
- Capacitor & RC circuit
- Magnetic field & Lorentz force
- Ohm's law
- Series and parallel resistors
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps