Hyperloop (3D)
About this app
A pod in a partial-vacuum tube, levitating magnetically and driven by a linear motor. Pressure, speed and blockage ratio control the drag live: at high pressure and with a large pod the air piles up ahead of the nose (Kantrowitz limit), and only vacuum and a slim pod make it efficient. In the bend the pod tilts, and if the radius is too tight the lateral acceleration is exceeded. Plus a comparison of energy and travel time with truck, freight rail and air freight.
The physics
A hyperloop is a pod in a tube with a partial vacuum, typically around 100 Pa, about a thousandth of sea-level pressure. The pod levitates magnetically and is driven by a linear motor. Rolling friction disappears, and drag F = ½·ρ·c_d·A·v² falls with density ρ = p/(R·T). Inside a tube, however, the air can only escape through the gap between pod and wall. If the blockage ratio β = A_pod/A_tube is too large, the air reaches the speed of sound in that gap and the pod pushes a column of air ahead of it: the Kantrowitz limit. It depends only on Mach number and β.
What the app shows
A 3D pod travels in slow motion through a transparent, cut-open or closed tube with maglev and linear motor. Pressure steps from 1 bar down to 100 Pa and sliders for speed and blockage ratio control drag live, and air particles make the build-up in front of the nose visible. The physics panel works out density, drag and power P = F·v and shows whether β is below or above the critical value. The curve panel gives the minimum radius and tilt in a bend, and the comparison sets energy per tonne-kilometre and transit time over 500 km against trucks, freight rail and air cargo.
Things to try
Set 1 bar, 600 km/h and β = 0.5: the air chokes and drag is high. Then lower the pressure to 100 Pa; the choking remains but costs very little. Next reduce β to 0.2 and the air flows past again. In the curve panel, tighten the bend radius until the lateral acceleration limit is exceeded; for passengers about 0.1 to 0.15 g is considered comfortable. The info panel puts the technology in context: test facilities exist, but no line is in regular service, and the comparison figures are rounded reference values.
Frequently asked questions
- What is the Kantrowitz limit for a hyperloop?
- The Kantrowitz limit is the ratio of pod to tube cross-section above which the air in the gap around the pod reaches the speed of sound. Beyond it no more air can flow past, it piles up in front of the nose and drag rises sharply. A slimmer pod or a compressor in the nose can avoid this.
- Why does a hyperloop run in a vacuum?
- Air drag is proportional to air density, which in turn is proportional to pressure. At around 100 Pa the air is about a thousand times thinner than at ground level, so high speeds need little propulsion power. Keeping a vacuum over long distances, however, is technically and economically demanding.
- Is there a hyperloop in commercial operation?
- No. Test facilities exist, such as the European Hyperloop Center in Veendam in the Netherlands, but there is no line in regular service. Maintaining a vacuum over long distances and the construction and operating costs remain unresolved.
- What can I adjust in the app?
- You set the tube pressure, speed, blockage ratio and the bend radius of the route. The app calculates drag, power, lateral acceleration and tilt and compares energy use and transit time with trucks, freight rail and air cargo.
Subject: Logistics & Supply Chain
More from Logistics & Supply Chain
- AAS & digital product passport
- Autonomous traffic in logistics systems (3D)
- Stock & service level
- Blockchain traceability
- Bullwhip effect
- Circular Economy — R-strategies
- Digital Twin level model
- Bottleneck & throughput (3D)
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps