Skip to content
All apps

RLC circuit & resonance

About this app

RLC series resonant circuit: frequency response |Z|(ω) and current I(ω) with resonance at ω₀ = 1/√(LC); resonance curve with quality factor Q and bandwidth, a draggable frequency marker shows Z, I and φ at the point.

Series resonance

A series RLC circuit has a resistor R, inductor L and capacitor C in series with an AC source. Its impedance is |Z| = √(R² + (ωL − 1/(ωC))²). At the resonant angular frequency ω₀ = 1/√(LC), or f₀ = 1/(2π√(LC)), the reactances cancel. Then |Z| is at its minimum and equals R, the current I = U/|Z| peaks, and the phase is zero. The quality factor Q describes how sharp the resonance is; the bandwidth between the −3 dB points is Δω = R/L = ω₀/Q.

What the app shows

The chart shows either the current I(ω) or the impedance |Z|(ω) against frequency, together with the phase φ(ω). Resonant frequency f₀ and bandwidth Δf are marked. A draggable marker gives |Z|, I and φ at the chosen frequency. A panel lists f₀, the quality factor Q, the bandwidth and the current at resonance.

Things to try

Reduce the resistance: the resonance peak becomes taller and narrower, and Q rises. Increase it and the curve becomes flat and wide. Change L or C: the resonant frequency moves, and quadrupling L halves it. Drag the marker across the resonance and watch the phase change sign as the circuit turns from capacitive to inductive.

Frequently asked questions

How do you calculate the resonant frequency of an RLC circuit?
For an ideal RLC circuit the resonant frequency is f₀ = 1/(2π·√(L·C)). At this frequency the inductive and capacitive reactances are equal, ωL = 1/(ωC). In a series circuit, R does not shift the current resonance, it only affects its sharpness.
What is the quality factor Q of a resonant circuit?
The quality factor Q tells how sharp the resonance is. For a series RLC circuit, Q = (1/R)·√(L/C) = ω₀/Δω. A high Q means a narrow, tall resonance curve and low damping.
What happens at resonance in a series RLC circuit?
The reactances of inductor and capacitor cancel, so the impedance is at its minimum and equals R. The current is at its maximum, and voltage and current are in phase. The voltages across L and C can be much larger than the applied voltage.
What does the resonance app show?
It shows the frequency response of current or impedance and the phase of a series RLC circuit, with resonance and bandwidth marked. R, L and C are set with sliders, and a draggable marker shows |Z|, I and φ at any frequency.

Subject: Electrical engineering fundamentals

More from Electrical engineering fundamentals

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps