Skip to content
All apps

Stirling engine (3D)

About this app

Heat becomes motion: a running cutaway model of a Stirling engine with a hot and a cold side, displacer and power piston 90° out of phase. The gas visibly migrates between hot (glowing) and cold (cooling fins); a live p-V diagram shows the cycle. Temperature difference and speed adjustable (Carnot efficiency).

With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.

How a Stirling engine turns heat into motion

The Stirling engine is a hot-air engine with a closed gas space: the same amount of gas is moved back and forth between a hot and a cold side. On the hot side the gas expands and the pressure rises; on the cold side it contracts. A displacer shuttles the gas, and a power piston takes off the work. Because the two run 90° out of phase, pressure is high while the volume grows and low during compression. Each revolution leaves useful work.

What the app shows

The cutaway shows a gamma-type Stirling engine: a horizontal glass cylinder with a glowing hot side and cooling fins on the cold side, the displacer inside, and next to it a vertical power cylinder with piston, connecting rod and flywheel. The gas glows hot or cold depending on where it is. Below, a p-V diagram runs along; the loop traced out is the cycle, and its area is the work per revolution. Pressure is computed with the Schmidt analysis.

What you can try

Set the temperature difference between 60 and 600 K while the cold side stays at 300 K. As the difference grows, the hot side glows brighter, the loop in the p-V diagram widens and the work per cycle increases. The readout tracks the Carnot efficiency η = 1 − T_cold/T_hot as the upper limit. Use the speed control to slow the engine down and follow the 90° phase shift between displacer and piston.

Frequently asked questions

How does a Stirling engine work?
A Stirling engine uses a displacer to move an enclosed gas between a heated and a cooled zone. When warm it expands and pushes on the power piston; when cool it can be compressed again with little force. Because displacer and power piston run about 90° out of phase, the expansion work exceeds the compression work, and the difference drives the flywheel.
What efficiency can a Stirling engine reach?
The theoretical limit is the Carnot efficiency η = 1 − T_cold/T_hot, with absolute temperatures. With a hot side at 600 K and a cold side at 300 K that is 50 %. An ideal Stirling cycle with a perfect regenerator reaches this value; real engines stay well below it because of friction, heat losses and incomplete regeneration.
What does the p-V diagram of a Stirling engine show?
The p-V diagram plots gas pressure against volume. During one revolution the state runs around a closed loop. The enclosed area is the work the engine delivers per revolution; a larger temperature difference makes the loop wider.
What can I try out in this app?
You set the temperature difference and speed and watch the gas move between hot and cold sides on the running cutaway model. Hot and cold temperatures, Carnot efficiency and work per cycle are shown, and the p-V diagram updates live.

Subject: Physics experiments (Deutsches Museum)

More from Physics experiments (Deutsches Museum)

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps