Tensegrity — floating struts (3D)
About this app
Three tensegrity structures (prism, icosahedron, Snelson's tower), simulated live: the struts never touch, a prestressed cable net holds them. Remove the prestress, add a load or cut a cable, and you see that the stiffness comes from tension. Exhibit-ready.
What tensegrity means
Tensegrity combines tension and integrity: holding together through tension. In a tensegrity structure the compression struts do not touch each other and seem to float. They are held by a continuous net of cables that carry only tension. Pretension is what matters: only when the cables are slightly shorter than the geometry requires do they push the struts apart and make the whole thing stiff. Kenneth Snelson built the first such sculpture in 1948, and Buckminster Fuller coined the term.
What the app shows
Three structures are simulated physically in real time: a prism with 3 struts and 9 cables, an icosahedron tensegrity with 6 struts and 24 cables, and a tower of three stacked prisms after Snelson’s Needle Tower. The struts are rigid, the cables pure tension springs. Colours show the tension in the cables and the compression in the struts, and a bar chart lists every cable force. Readouts give the largest cable force, the height of the top, the deflection under load and whether struts touch.
What you can try
Turn the pretension down: at 0 % the cables are just taut, at negative values they go slack, the structure loses its shape and the struts lean against each other. Put a load of up to 150 N on the top and read off the deflection, once with little and once with a lot of pretension. Cut a cable: the prism and the tower sag or topple. This makes visible that the stiffness comes from the tension, not from the struts alone.
Frequently asked questions
- What is a tensegrity structure?
- A tensegrity structure consists of compression struts that do not touch each other and a continuous net of pretensioned cables that holds them in place. Each cable carries only tension, each strut only compression. The word joins tension and integrity. The principle became known through Kenneth Snelson’s sculptures from 1948 and through Buckminster Fuller.
- Why is a tensegrity structure floppy without pretension?
- Cables can only take tension. Without pretension there are movements in which no cable has to get longer, and the structure gives way without resistance. With pretension every cable is already under tension, any deformation changes cable forces immediately and the net resists it. Stiffness grows with pretension; a broken or slack cable can make the whole structure buckle.
- Where is tensegrity built or found?
- The principle appears in sculptures such as Snelson’s Needle Tower, in dome and roof structures and in bridges like the Kurilpa Bridge in Brisbane. In biology Donald Ingber described the cytoskeleton as a tensegrity structure of compression-resistant microtubules and tensioned actin filaments. Furniture and toys also use the effect of seemingly floating parts.
- What can I try in the tensegrity app?
- You choose prism, icosahedron or tower, set the pretension from slack to strongly tensioned and put a load of up to 150 N on the top. The app shows cable forces as colours and bars, the deflection and whether struts touch. One button cuts a cable, another resets everything.
Subject: Architecture & scenography
More from Architecture & scenography
- Setback areas in 3D
- Visitor flows (3D)
- Expo pavilions (3D)
- Gaudí's hanging model (3D)
- Building class finder
- Cathedral statics
- Sound islands (3D)
- Cosmos zoom — micro and macro cosmos
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps