Transformer
About this app
An iron core with primary and secondary windings and animated magnetic flux in 3D: turns ratio U₂/U₁ = N₂/N₁ = I₁/I₂; turns and primary voltage via slider, stepping up and down made visible.
How a transformer works
A transformer consists of two windings on a shared iron core. An AC voltage on the primary winding creates an alternating magnetic flux Φ that circulates in the core and passes through the secondary winding. There it induces a voltage according to Faraday’s law. For an ideal transformer, U₂/U₁ = N₂/N₁. Because power is conserved (P₂ = P₁), the currents behave inversely: I₁/I₂ = N₂/N₁. More voltage on the secondary side means less current. A transformer does not work with DC, because the flux would not change.
What the app shows
A 3D model with an iron core, a red primary and a blue secondary winding. Animated arrows show the flux Φ in the core, and the winding density changes with the number of turns. A panel shows the operating mode (step-up, step-down or 1:1), U₂, I₂, the power on both sides and the turns ratio. You can rotate the view by dragging.
Things to try
Set N₁ and N₂ between 20 and 400 turns, along with the primary voltage (10 to 400 V) and primary current (0.1 to 5 A). Make N₂ larger than N₁: the voltage rises and the secondary current falls. Compare the powers P₁ and P₂; in the ideal model they stay equal. With N₁ = N₂ you get a 1:1 isolation transformer.
Frequently asked questions
- How does a transformer work?
- The primary winding, fed with AC, creates a constantly changing magnetic flux in the iron core. This flux passes through the secondary winding and induces a voltage there. In an ideal transformer the voltage ratio equals the turns ratio.
- How do you calculate the secondary voltage of a transformer?
- For an ideal transformer, U₂ = U₁·N₂/N₁. With 230 V on the primary, 1000 primary and 50 secondary turns, U₂ = 11.5 V. Real transformers deliver slightly less because of losses.
- Why does current drop when a transformer steps up voltage?
- An ideal transformer transfers power without losses, so U₁·I₁ = U₂·I₂. If the voltage rises, the current must fall by the same ratio: I₂ = I₁·N₁/N₂. That is why power lines use high voltages: smaller currents mean lower line losses.
- What can I adjust in the transformer app?
- You set the turns N₁ and N₂, the primary voltage and the primary current. The 3D view shows the windings and magnetic flux, and the panel shows secondary voltage, secondary current, both powers and the turns ratio.
Subject: Electrical engineering fundamentals
More from Electrical engineering fundamentals
- Diode & rectifier
- Three-phase power
- Electric field & Coulomb
- Electromagnetic induction
- Kirchhoff's laws
- Capacitor & RC circuit
- Magnetic field & Lorentz force
- Ohm's law
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps