Skip to content
All apps

AGV navigation 3D

About this app

An automated guided vehicle drives the same hall with five navigation methods from VDI 2510: inductive guide wire, magnetic or colour tape, laser with reflectors, dead reckoning with floor markers and SLAM. Put a person in the way or move a station and compare which method keeps going without rebuilding. With safety scanner, error ellipse, lidar map and a VDA 5050 message log.

With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.

How AGVs know where they are

Automated guided vehicles (AGVs) are floor-bound, automatically controlled vehicles for in-plant transport, as defined in VDI 2510. To drive, they need their pose: x, y and heading θ. Track-guided AGVs follow a guide line in the floor, such as an inductive wire or a magnetic or coloured tape; a sensor only measures the lateral offset. Free-navigating AGVs follow virtual paths stored in software. They integrate distance and rotation from wheel encoders and correct against fixed references: reflectors for laser navigation, transponders in the floor, or with SLAM the contour of the hall itself.

What the app shows

One AGV drives the same 3D hall with five methods: inductive guide wire, magnetic or optical tape, laser with reflectors, odometry with floor markers, and lidar SLAM. For each method the app explains the sensing principle, for example the two coils above the guide wire or angle measurement to reflectors. You can see the protective field of the safety scanner, the growing error ellipse of odometry and the lidar map. A log shows orders and state messages according to VDA 5050.

Things to try

Place a person in the path: in the warning field the vehicle slows, in the protective field it stops. Classic AGVs wait until the path is clear; with SLAM the vehicle plans a detour. Then use the Layout panel to move station B to the back wall and compare which method keeps running without modification. Track-guided systems need a new guide line in the floor, free-navigating ones only a new path in software.

Frequently asked questions

What navigation methods do AGVs use?
Track-guided methods are inductive guide wires and magnetic or optical tape. Free-navigating methods are laser navigation with reflectors, odometry with floor markers and lidar SLAM without added infrastructure. They differ in flexibility, installation effort and accuracy.
What is SLAM navigation for AGVs and AMRs?
SLAM stands for simultaneous localization and mapping. The vehicle scans its surroundings with lidar, builds a map and locates itself in that map at the same time. It needs no markers on the floor or walls and can plan around obstacles.
What is VDA 5050?
VDA 5050 is an interface between a fleet controller and automated vehicles. The controller sends orders as nodes and edges, and the vehicle reports its state, transmitted via MQTT. This lets vehicles from different manufacturers run under one controller.
How does an AGV protect people?
A safety laser scanner monitors the area in front of the vehicle, independent of navigation. If someone enters the warning field, the AGV slows; in the protective field it stops. In the app you can drag a person into the path.

Subject: Technical logistics & intralogistics

More from Technical logistics & intralogistics

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps