Palletising cell 3D
About this app
A palletising cell with infeed, robot, gripper, Euro pallet and outfeed for three case studies: cans, crates and parcels. Kinematics, gripper, stacking pattern, double station and sequencing buffer are selectable; cycle time, capacity against target, pallet change, floor space and feasibility are computed live.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
The engineering question
A palletizing cell stacks goods onto pallets automatically: infeed, robot with gripper, pallet station and outfeed to the stretch wrapper. Whether it meets the required throughput follows from a simple ratio: capacity = units per pallet ÷ time per pallet. Time per pallet is the sum of all picks (grip, move, place, return) plus the downtime for the pallet change. A gripper that takes many units at once reduces the number of picks; a second pallet station shortens the downtime. The cell must also be feasible: robot payload and reach limit the options.
Inside the simulator
There are three case studies: beverage cans from a production line (target 8,333 cans per hour), cases from a production island (30 per hour) and parcels in shipping (600 per hour, random weights). You choose a 4-axis or 6-axis articulated robot, a gantry, a SCARA or a cobot, then vacuum, clamp or layer gripper, column or interlocked pattern and one or two pallet stations. The app computes cycle time per pick, capacity against target, utilisation, pallet change, footprint and degree of automation, and flags payload or reach problems.
Things to try
Start with the cans and a single-item gripper: 5,000 picks per pallet cannot be done in 36 minutes by any robot. A layer gripper picks 374 cans at once and solves it. For parcels, look at the sequencing buffer: without it heavy parcels end up on light ones; with it the weight violations drop while the footprint grows. Also compare the automatic pallet change with a forklift, which turns two process steps into manual work.
Frequently asked questions
- How do you calculate the capacity of a palletizing cell?
- Divide the units per pallet by the time per pallet. That time is the cycle time per pick multiplied by the number of picks, plus the downtime while the pallet is changed. If the infeed conveyor is slower, its rate is the limit.
- Which robot type is used for palletizing?
- Most often a 4-axis articulated robot: a parallelogram keeps the flange horizontal, and palletizing does not need two extra wrist axes. Gantries cover large areas, SCARA robots are fast but have little stroke and payload, and cobots work without a safety fence but move more slowly.
- What is the difference between column and interlocked stacking?
- In column stacking every layer is identical, so items sit directly on top of each other. In an interlocked pattern every second layer is rotated so the layers bind together. The load becomes more stable, but sometimes fewer units fit per layer.
- What assumptions does the app use?
- Axis speeds and payloads are typical values, not manufacturer data. An automatic pallet change takes 18 seconds, a forklift change about 90 seconds. All assumptions are listed in the app’s info panel.
Subject: Technical logistics & intralogistics
More from Technical logistics & intralogistics
- Evaluating automation: LCCA, NPV, payback
- Flow lab: throughput, WIP, cycle time
- Conveyor atlas 3D
- AGV fleet sizing
- AGV navigation 3D
- Control loop lab: cruise control on a hill
- Robot kinematics & workspace (3D)
- Tugger train planner 3D
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps