Sorting system 3D
About this app
A unit-load sorting system like in a parcel hub, from the swap body via weighing, singulation and the scanner tunnel to the chutes. Topology (line, loop, circle), sorter technology (cross-belt, tilt-tray, shoe, pusher) and induction are switchable. A capacity chain shows which area limits the sorting rate: usually induction and identification, rarely the sorter.
With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.
How a sorting system works
A parcel sorting system in a hub has four functional areas: infeed with weighing and dimensioning, preparation with singulation and minimum gaps, identification in a scanner tunnel, and sorting with induction, distribution conveyor and destinations. Throughput is set by the weakest link in this chain. Induction and identification are often the limit, the sorter itself less often. Sorter types differ in how items occupy them: cross-belt and tilt-tray sorters carry one item per carrier, shoe and pusher sorters divert items at arbitrary spacing.
What the app shows
The system runs as a 3D simulation from the swap body to the chutes. You can switch topology (line, loop, circle), sorter technology (cross-belt, tilt-tray, shoe, pusher) and induction (manual, semi-automatic, fully automatic). During operation you set infeed mode, inflow, scanner read rate and number of destinations. Indicators show sorting rate, error rate, recirculation, backlog and manual recoding; a performance chain highlights the bottleneck. Unreadable or unassignable items go to the reject chute, each with its reason.
Experiments
With manual induction an operator places just over 1,100 items per hour, even if a tilt-tray sorter could handle 11,500. Switch to fully automatic and watch sorting rate and backlog. Then lower the read rate: recoding overflows and more items end up in the reject chute. Raise the destinations to 20 and compare line and loop. In a loop, items without a free destination go round again, but they occupy carriers that induction then lacks.
Frequently asked questions
- What types of sorters are there?
- Common types are cross-belt, tilt-tray, shoe and pusher sorters. Cross-belt and tilt-tray sorters carry one item per carrier; the cross-belt discharges actively, the tilt tray uses gravity. Shoe sorters and pushers divert items at any spacing, and pushers need large gaps to do so.
- What limits the throughput of a sorting system?
- Throughput is set by the weakest area in the chain of infeed, preparation, identification, induction and distribution conveyor. In many systems induction and identification are the bottleneck. A faster sorter does not help in that case.
- What is the difference between a line sorter and a loop sorter?
- On a line sorter every item must be discharged by the last destination, otherwise it goes to the reject chute. On a loop sorter items without a free destination travel another round. Recirculation acts as a buffer and allows batch operation.
- How are destinations emptied in the simulation?
- Each destination buffers up to 14 parcels. From eight parcels on, an operator swaps the roll container, which takes 15 seconds. If the destination fills up before that, no items are discharged there.
Subject: Technical logistics & intralogistics
More from Technical logistics & intralogistics
- Evaluating automation: LCCA, NPV, payback
- Flow lab: throughput, WIP, cycle time
- Conveyor atlas 3D
- AGV fleet sizing
- AGV navigation 3D
- Palletising cell 3D
- Control loop lab: cruise control on a hill
- Robot kinematics & workspace (3D)
A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps