Skip to content
All apps

Three-phase asynchronous motor (3D)

About this app

A cutaway three-phase asynchronous motor: three phase-colored pulsing windings create the rotating field (sum vector visible), the squirrel-cage rotor follows with slip. Frequency, pole-pair number (n = 60·f/p), load and phase swap L1↔L3 adjustable live — in sync with the sine-curve and vector diagram.

With explain mode: an AI tutor walks you through the app, points out what matters in the scene and answers your questions.

Rotating field and synchronous speed

Three alternating currents, 120° apart in phase, feed three stator windings that are spatially offset. Their magnetic fields add up to a field of constant strength that travels around the stator: the rotating field. It turns at the synchronous speed n₁ = 60·f / p, where f is the supply frequency and p the number of pole pairs. At 50 Hz that gives 3000, 1500 or 750 rpm for p = 1, 2 or 4. Swapping two line conductors, such as L1 and L3, reverses the direction of the field.

Why it is called asynchronous

The rotating field induces voltages in the bars of the squirrel-cage rotor. The rotor currents interact with the field to produce a force, and the rotor follows the field. Induction only happens with relative motion, so the rotor always turns slightly slower than the field. This difference is the slip, s = (n₁ − n) / n₁, and it grows with load. Because rotor and field never run at the same speed, the motor is called asynchronous. With no brushes or slip rings, the squirrel-cage motor is robust and widely used in industry.

What the app shows

The three windings pulse in their phase colours, an arrow shows the resulting field vector, and the cage rotor turns with slip. You set the frequency from 5 to 60 Hz, the pole pairs to 1, 2 or 4, and the load. The values panel shows field speed, rotor speed, slip and direction together with the formula. The currents panel links the sine curves of the phase currents to the vector diagram. With “Swap L1 ↔ L3” you watch the rotor brake and run up in the opposite direction. An explain mode with an AI tutor is available.

Frequently asked questions

How does a three-phase induction motor work?
Three phase-shifted currents in spatially offset stator windings create a rotating magnetic field. This field induces currents in the squirrel-cage rotor, which together with the field produce torque. The rotor turns slightly slower than the field because voltage is only induced when there is relative motion.
How do you calculate the synchronous speed of an AC motor?
Synchronous speed is n₁ = 60·f / p in revolutions per minute, with supply frequency f in hertz and p pole pairs. At 50 Hz this gives 3000 rpm for p = 1, 1500 rpm for p = 2 and 750 rpm for p = 4. The actual rotor speed is lower by the slip.
What is slip in an induction motor?
Slip is the relative difference between field speed and rotor speed: s = (n₁ − n) / n₁. It is small at no load and increases under load, because the rotor falls further behind and more current is induced. For standard motors, rated slip is typically a few percent.
Can I reverse the motor in the app?
Yes. The “Swap L1 ↔ L3” button exchanges two line conductors. The rotating field changes direction immediately, and the rotor slows down and accelerates the other way.

Subject: Electrical & Control Engineering

More from Electrical & Control Engineering

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps