Skip to content
All apps

A week of power

About this app

Explore three real SMARD electricity weeks in 3D and test storage power and capacity in a transparent scenario.

The core idea

Wind and solar do not produce power exactly when it is needed. Storage can absorb surpluses and release them later. Two quantities matter here: power in gigawatts (GW), meaning how fast energy goes in or out, and energy capacity in gigawatt-hours (GWh), meaning how much fits in total. Running 20 GW for 5 hours requires 100 GWh, plus losses. Demand that remains after renewables and storage is called positive residual load. It has to be covered by other generation or imports and does not mean a blackout.

What the app shows

The app uses hourly data from Germany’s Federal Network Agency (SMARD.de) for three weeks in 2024: a winter week in February, a summer week in July and a week with very little wind and sun in November. The 3D scene shows wind, solar, other renewables, demand and an additional idealised battery. It charges only from renewable surplus, discharges against remaining demand and has a round-trip efficiency of 90%. 168 columns in the background show renewable output across the week, and a chart plots generation and demand as hourly averages.

Try it yourself

Pick a week and set energy capacity (up to 2000 GWh), charge and discharge power (up to 100 GW) and the initial fill. Play the week or click the chart to jump to a specific hour. The balance panel shows how much other supply is still needed over the week and how much surplus goes unused. In the November week you can see that a large battery helps little when there is hardly any surplus to charge it. Connections in the scene represent an energy balance, not physical power routes; there is no grid-flow or price forecast.

Frequently asked questions

What is the difference between GW and GWh for energy storage?
GW (gigawatts) is power: how much energy per unit of time a storage system can take in or deliver. GWh (gigawatt-hours) is energy: how much it can hold in total. A 20 GW battery running at full output for 5 hours needs 100 GWh of capacity, plus losses.
What is a “Dunkelflaute”?
Dunkelflaute is the German term for a period with little wind and little sunshine at the same time, typically in autumn or winter. Wind and solar plants then cover only a small share of demand for several days. Storage only helps during such a period if it was filled beforehand.
What is residual load in a power grid?
Residual load is demand minus the output of wind, solar and other renewable sources. If it is positive, the gap must be filled by other power plants, storage or imports. If it is negative, there is a surplus that can be stored, exported or curtailed.
Where does the data in the “Power Week” app come from?
The app uses hourly generation and demand data from SMARD.de, published by Germany’s Federal Network Agency under CC BY 4.0, for three weeks in 2024. Values are hourly averages in GW. The additional battery is a simplified model scenario, not a forecast.

Subject: Electrical & Control Engineering

More from Electrical & Control Engineering

A VisuApp by heyprof: interactive, free in your browser, no sign-up. What is a VisuApp? · All apps